April 26, 2013
M2 Crown iTech5000HD Device File Rev A
This file is compatible with the Crown iTech5000HD Power Amplifiers and contains the DSP parameter values required by the M2 System

 
To load the M2 DSP Device File into a Crown I-Tech amplifier:
1. Using your computer download the JBL M2 Crown I-Tech DSP device file located in the downloads section at www.jblpro.com/M2.

2. Transfer the file to the root directory of a USB thumb drive and insert the drive into the amplifiers front-panel USB port.

3. Text in the amplifier display asks whether you want to load a device file or preset file. Depress the LEFT Encoder (large knob/button) to select DEVICE.

4. The amplifier screen displays Select File to Load. Rotate the right Encoder to select the M2 DEVICE file in the USB drives root directory. 

(Note: You cant explore folders or subfolders in the USB drives directory.)

5. Depress the right Encoder to load the file. The amplifier will load the file into its memory and the display will show the Eject Menu.

6. Depress the left Encoder when the transfer is complete.

US Customers:

For Crown iTech Amplifier Support contact 
Crown Audio
(800) 342-6939 
support@CrownAudio.com
http://www.crownaudio.com/support.htm 

For M2 System Support, Contact
JBL Professional
(818) 893-8411
UStechsup@JBLProService.com

International Customers: please contact the HARMAN Professional Distributor in your region
A list of HARMAN Distributors can be found at http://www.jblpro.com/pages/contacts/intdist1.htm 



